Pressure Control Equipment

ControlMate

Pressure control is the simplest and most immediate method of reducing leakage. However, without electronic control, a PRV (Pressure Reducing Valve) must be set-up to ensure a guaranteed minimum pressure to the critical (usually highest) point in the network under "worst case" maximum flow conditions. During periods of lower flow, this set-up leads to higher pressures than are necessary. Active pressure management using PRV controllers enables pressure to be optimised with changing demand.
Palmer Environmental’s ControlMate range enables PRV outlet
pressure to be controlled reliably and safely.
Download Control Mate Datasheet.pdf

ControlMate-2

ControlMate-2 is a low cost controller that enables the pressure into a zone to be switched between two pre-set values (“low” and “high”) according to the demand (flow rate) or the time of day. This enables the Pressure Reducing Valve (PRV) to be controlled reliably and safely.
Download ControlMate-2 Datasheet.pdf

ControlMate FM

The ControlMate range enables the outlet pressure of a Pressure Reducing Valve (PRV) to be controlled reliably and safely. ControlMate-FM allows the pressure into a zone to be continually adjusted to any desired value, which is intelligently calculated by the controller according to the zone’s actual demand (flow modulation) or according to a pre-programmed
time of day.
Download ControlMate FM Datasheet.pdf

ControllerCom

ControllerCom is designed to provide SMS/GSM reporting of logged data and remote programming for ControlMate electronic pressure controllers. The unit can be fitted to any Wessex / Palmer controller
with a CX connector in place. The operator has the benefit of versatile setup options to suit different applications.

• SMS reporting of logged data
• SMS programming message to Controller
• GSM data communication at programmed time windows

A range of external battery packs is available to allow the anything up to full 24-hour instant access.
Download ControllerCom Datasheet.pdf